Free Sky

Working on Free Sky.../// :) :) :)

Vivekanand Ji 150

Vivekanand ji 150

Vivekanand ji 150

Working on a project EG PAGE (egpage.com)...

NTLDR Missing Problem

To resolve this problem, correct the Heads (sides) value in the FAT32 BPB so that the Windows XP startup can continue. To update the value, rewrite the Windows 95, Windows 98, or Windows Millennium Edition startup code. To do this, follow these steps:

1. Restart the computer by using a Windows 95, Windows 98, or Windows Millennium Edition startup disk that contains the Sys.com file. (By default, this file is included.)
2. Make a backup copy of the Msdos.sys file in the root directory of the system drive. To do this, type the following commands at a command prompt:
   attrib -h -r -s c:\msdos.sys
   rename msdos.sys *.ysy
   
   v>
3. At a command prompt, type sys c: to rewrite the Windows 95, Windows 98, or Windows Millennium Edition startup code with accurate BPB information. If this command runs successfully, go to step 4.
   
   If you are using a Windows Millennium Edition startup disk, and you receive the following error message, one or more files in the Windows Millennium Edition installation have been removed:
   Cannot find the system file in the standard locations on drive C:
   Follow these steps to put the correct files on the drive so that the sys command can locate them:
   1. Type the following commands. Press ENTER after each command:
      c:
      cd\windows
      
      If Windows is installed in a folder other than the Windows folder, adjust the commands accordingly.
   2. Try to switch to the Command folder by typing the following command:
      
      
      cd command
      
      If you receive an error message that the path is not found, type the following command to create the Command folder, and then run the cd command command again:
      md command
   3. Switch to the EBD folder by typing the following command:
      
      
      cd ebd
      
      If you do not receive an error message that the path is not found, type the following command to create the EBD folder, and then repeat the cd ebd command:
      md ebd
   4. In the EBD folder, use the following commands to copy the Io.sys file from the root of the hard disk and to rename the Io.sys file to Winboot.sys:
      attrib -s -h -r c:\io.sys
      copy c:\io.sys winboot.sys
      
      Winboot.sys is the file that Sys.com requires.
   5. Switch back to drive A, and then type the following commands:
      a:
      sys c:
   
   Type the following commands to restore the original Msdos.sys file. Press ENTER after each command:
   
   
   attrib -s -h -r c:\msdos.sys
   copy c:\msdos.ysy c:\msdos.sys
   
   Press Y to overwrite the existing Msdos.sys file. You will receive a "1 FILE(S) COPIED" verification that the file was overwritten.
4. Restart the computer to Windows 95, Windows 98, or Windows Millennium Edition, and then try to install or upgrade to Windows XP again.
   
   Note Or, after you run the sys c: command, you can start to the Recovery Console, and then use the fixboot command to rewrite the Windows XP startup code. With this procedure, the original installation continues normally.

Back to the top